SPL Phonitor One
The SPL Phonitor One is an audiophile headphone amplifier with an innovative Phonitor Matrix and outstanding sound quality. The technically sophisticated headphone amplifier manages the balancing act between increased power and high level without losing its extremely detailed sound quality. Whether a tape deck, CD player or mixer, up to two analog stereo sources can be connected to the SPL Phonitor One.
Important characteristics
- Pre-amplification: two Burr-Brown OPA 2134 SoundPlus ™ operational amplifiers with minimal distortion of only 0.00008%, extremely low noise, slew rate: 20V / µs
- Bypass capacitors of the coupling capacitors in the signal path: film capacitors with low capacitance
- Coupling capacitors: Panasonic 'Electric Double Layer' gold electrolytic capacitors
- Thermally coupled output stage Transistors
- Phonitor Matrix
- Three setting parameters: Crossfeed, Speaker Angle and Center Level
- Two analog stereo sources can be connected
- Levels of up to +22.5 dB can be achieved
- Low-drop operating voltage Regulation
Technical specifications
Analog inputs
- 6.35mm stereo jack sockets (balanced), cinch
- Input level (max.): +22.5 dBu
- Input impedance Line In 2 (balanced): 20 kΩ
- Common mode rejection: <60 dB
- Input impedance Line In 1 (unbalanced): 47 kΩ
Headphone output
- 6.35mm stereo jack socket: tip = left, ring = right, shaft = GND
- Source resistance: 20 Ω
- Frequency response (- 3 dB): 10 Hz - 200 kHz
- Noise (A-weighted, 600 Ω): -97 dBu
- THD + N (0 dBu, 10 Hz - 22 kHz, 600 Ω): 0.002%
- THD + N (0 dBu, 10 Hz - 22 kHz, 32 Ω): 0.013%
- Max. Output power: (600 Ω) 2 x 190 mW
- Max. Output power: (250 Ω) 2 x 330 mW
- Max. Output power: (47 Ω) 2 x 400 mW
- Fade-out attenuation: (600 Ω) -99 dB
- Crosstalk: (1 kHz, 600 Ω) -75 dB
Internal power supply; Switching power supply with secondary Transformer
- Operating voltage for analog audio electronics: +/- 17 V
- Operating voltage for headphone output stage: +/- 19 V
- Operating voltage for relay: +12 V
External power supply
- AC / DC switching adapter: Mean Well GE18 / 12-SC
- DC connector: inner pin 2.1mm (+); Outer ring 5.5mm (-)
- Input: 100 - 240 V AC; 50-60 Hz; 0.7 A
- Output: 12 V DC; 1.5 A
Mass & weight
- W x H x D (width x height including feet x depth): 210 x 49.6 x 220 mm 8.23 ??x 1.95 x 8.66 inches
- Device weight: 1.45 kg 3.2 lb
- Shipping weight including packaging: 2 kg 4.4 lb
Check out these Videos to the SPL Phonitor One and the SPL Series One:
Phonitor One – Overview
SPL Series One – Introduction Phonitor One & Phonitor One d
Product safety information
Manufacturer information:
SPL electronics GmbH
Ostlandstraße 32
Nordrhein-Westfalen
Niederkrüchten, Deutschland, 41372
andreas.koch@spl.audio
https://spl.audio/
There are no reviews yet.